Essential Inspection and Maintenance Plan for Press Brakes

Short Answer

Press Brakes maintenance planning should link inspection, cleaning, lubrication and adjustment to asset criticality, operating hours and condition, with limits, ownership, records, escalation and spares.

Before each shift

Check safety, cleanliness, leaks, abnormal sound or vibration and work-zone condition under manufacturer instructions. Stop for unsafe conditions.

Weekly

Review consumables, fastening, guarding, fluids or lubrication and deeper cleaning according to the manual and use.

By operating hours

Convert manufacturer recommendations into hour-based work orders. Do not change intervals, lubricants or procedures without technical approval.

Quality as an early signal

Required force changes with material, thickness, bend length, V-opening and bending method. Calculate actual cases with a suitable operating margin.

Records and escalation

Review guarding and safe work procedures, then test long, short and feature-sensitive parts representative of production.

Measures

Track on-time PM, MTBF, MTTR, repeat failure, downtime, maintenance cost and output quality.

Frequently Asked Questions

Who owns follow-up?

A named process owner with periodic management review.

What proves success?

Documented improvement in outcomes, not activity completion alone.

When should the plan be reviewed?

Monthly at first, then by criticality, change and results.

Next Step

Share your part, material, target output and site requirements with SAKKARY MACHINERY for a technical review of press brakes.